Premium Tile Installation in Aurora, IL
Aurora is our home base. We work across the city's varied housing stock, from the brick two-flats and craftsman bungalows near the Fox River on the east side to the newer construction subdivisions west of Farnsworth Avenue. The mix of older wood-frame homes and recent slab-on-grade builds means we adapt our substrate approach on almost every job.
What Makes Aurora Homes Different
- Older homes near downtown and the East Side often have wood subfloors with decades of settling, requiring leveling compound and sometimes additional cement board before tile can go down.
- Many mid-century ranches in the West Side neighborhoods have original bathrooms with cast iron tubs and tile set directly over gypsum board, which needs full demo before any new waterproofing can be installed.
- Newer construction in the Oakhurst and Hometown subdivisions typically has concrete slab subfloors, which are more stable but may need grinding at high spots before large-format tile is set.
- Aurora's climate, with temperature swings of 80 degrees or more between seasons, makes proper expansion joint placement at perimeters especially important for long-term performance.
What We Do Here
Residential Tile Installation
Floors, entryways, and living spaces across Aurora's neighborhoods.
Learn moreBathroom & Shower Tile
Waterproofed shower systems and full bathroom tile in Aurora homes.
Learn moreKitchen Backsplash
Backsplash tile in Aurora kitchens, from subway to handmade patterns.
Learn more
Across Aurora
Aurora Homeowners Ask
Do Aurora homes need a permit for bathroom tile work?
In most cases, cosmetic tile replacement in an existing bathroom does not require a permit from the City of Aurora. However, if the project involves moving plumbing, adding a new shower, or making structural changes to the bathroom layout, a permit may be required. We recommend checking with the Aurora Building Department at 630-256-3780 for your specific project. We do not pull permits on our behalf but can provide documentation of the work if needed.
How do you handle parking and access on Aurora's older streets?
Most of our Aurora jobs are in neighborhoods with standard street parking, and we plan accordingly. We bring tools and materials in on the first day and typically do not need to block the street for more than a few minutes. For homes with narrow driveways or alley access only, we coordinate with you in advance about the best approach. We have not had issues with access on any Aurora job site.
Can you work in an Aurora home that is currently occupied?
Yes. Most of our work is in occupied homes. We contain the work area, protect adjacent surfaces, and clean up at the end of each day. The main restriction is that the tiled area needs to be off-limits for 24-48 hours after setting. For bathroom work, you will need access to another bathroom during that window. We discuss the schedule with you before starting so there are no surprises.
What should I do about the old tile before you arrive?
Nothing, unless you prefer to handle demo yourself to reduce cost. We can demo the existing tile as part of the job. If you do demo yourself, leave the cement board or backer board in place if it is in good condition. Removing it unnecessarily adds cost and substrate prep time. We will assess what is behind the tile when we arrive and let you know what the substrate needs before we start setting new tile.